Multimedia  Display Turntables e-commerce Imagery
Drives
MultiII Torque



$17.90 7mm  5-6rpm 12kg@1cm
Reversible low noise
  • 【Description:】This is a 50KTYZ 110V 5-6RPM CW/CCW synchronous motor, this motor is a high torque motor,can work for a longt time. Low noise and more robust. This synchronous motor is stable, durable, and compatible. We promise we will tested ever motor before shipment.
  • 【Specification:】 Shaft Diameter: 7mm ； Shaft Length: 14.5mm ； Working Voltage: AC 110-130V ； Speed: 5-6RPM ； Frequency: ~50/60Hz ； Power: 6W ； Capacitor: 0.56uF 200-300v ； Tourque: ≤12Kgf.cm； Rotation: CW/CCW (controllable)；
  • 【Application:】An good motor for household, hand-made, school project, model, light, AD and anything you want. Mainly used in instrument, automation, gluing machine, stage lamps and advertising display equipment, curtain automatic control, automatic voltage regulator, electric image, etc.
  • 【Attention:】 1.When the motor is running, it will hot, please do not touch it, It is normal that the motor becomes hot during motor working (the surface temperature may reach to 80-90℃ ). It does not affect the use, please do not worry. 2.Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you can contact us. Welcome to bulk purchase and OEM orders!


Open image  for full view.

Assemble unit and prepare base
for simple drop in of turntable.
Quick connectors on wires.

Amazon $8pr
Bolt to larger plant?



CS47


6mm Tubing $1.50
Alternate
Heat Shrink under or over?
Quieter Lazy Susan  $14.95
Rated to 1000lbs.

SPDT 3 position
(On Clockwise)
OFF
(On Counter Clockwise)
SPDT ON OFF ON $7
 




Amazon  $25Amazon $8pr

Have drop into square opening.
 

Turntable ring$17  $6.58 for 500lbQuiet one $14.95
Ebay  Amazon  $17 Direct drive. Easiest to couple. Multiple Tops

Synchronous Motor Drive With Switch Easiest Least expensive  Auto Reversing
Rotisserie Motor
Servo Turntable Drive Idler Tire Type (most Precision)

Uses:
3d Scanning actually needs a good turntable.
Optimal Size: 12-24"
Load Limit Min: 50lbs
Also: High conversion Rate pictures for adds,  Game Features, Slow animations for web home pages with background or special effects possible.
Servo VS Stepper Motor.
"To summarize, stepper motors are good solutions for applications with low speed, low acceleration, and low accuracy requirements. ????
... Servo motors are a better choice for systems requiring high speed, high acceleration, and high accuracy.   The trade-off is a higher cost and complexity."

The typical lifetime for a stepper motor is 10,000 operating hours. This approximates to 4.8 years; given the stepper motor operates one eight-hour shift per day. The lifetime of a stepper motor may vary in regards to user application and how rigorous the stepper motor is run. 		DMX VS Servo Control VS CNC

Dmx can memorize moves and repeat them with a moderately priced controller. No RF.
ss

 Some of the top Stepper Motor disadvantages are in that the motors provide a low efficiency.
 The Stepper Motor draws substantial power (remembering holding torque) regardless of load. The torque of a Stepper Motor declines rapidly with speed as torque is the inverse of speed as defined in the previous graph.

Servo Modes of failure...
Videos Regarding DIY turntables.  w/microwave motor..   Model 1   Model II  Technique    Stitch together Photos Iphoto
Article about rotating imagery.
Software Solutions  Ez Gif

Amazon $79
Always double check shipping.
Use Citi Points?  $4  All models
1 Week Typically
 Ebay China $48
 Alie $53
 DGH $126
 Ebay 2
Banggod NO Aff



Stepper Motor Via Controller Card

Gcode Controller

Arduino DMX
Development
Stepper Motor Drivers

Controller Board
Encoder Feedback



Power Supply
 Fox Alien
Offline Controller

Control Board Driver




Upgrading GRBL board to
External Drivers



CNC Controller




Mach 3 USB

CNC Protocal
RAMPS
GRBL
G-Code


Simple Rotation Board


 Options
UGS
GRBL
GCODE Visulizers

Grbl Software
GCode

Simulators


ShowGrbl
ShowCNC
Software to convert GRBL to
Show capability
DMX TO GRBL CONVERTER

Use pats from Disco Light


Germany $80
 Ebay Dmx
 Ebay Servo $40
 DMX Controller

$215